CloudWatchLogs

Table of Contents

Client

class CloudWatchLogs.Client

A low-level client representing Amazon CloudWatch Logs:

import boto3

client = boto3.client('logs')

These are the available methods:

can_paginate(operation_name)

Check if an operation can be paginated.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Returns
True if the operation can be paginated, False otherwise.
cancel_export_task(**kwargs)

Cancels the specified export task.

The task must be in the PENDING or RUNNING state.

See also: AWS API Documentation

Request Syntax

response = client.cancel_export_task(
    taskId='string'
)
Parameters
taskId (string) --

[REQUIRED]

The ID of the export task.

Returns
None
create_export_task(**kwargs)

Creates an export task, which allows you to efficiently export data from a log group to an Amazon S3 bucket.

This is an asynchronous call. If all the required information is provided, this operation initiates an export task and responds with the ID of the task. After the task has started, you can use DescribeExportTasks to get the status of the export task. Each account can only have one active (RUNNING or PENDING ) export task at a time. To cancel an export task, use CancelExportTask .

You can export logs from multiple log groups or multiple time ranges to the same S3 bucket. To separate out log data for each export task, you can specify a prefix that will be used as the Amazon S3 key prefix for all exported objects.

See also: AWS API Documentation

Request Syntax

response = client.create_export_task(
    taskName='string',
    logGroupName='string',
    logStreamNamePrefix='string',
    fromTime=123,
    to=123,
    destination='string',
    destinationPrefix='string'
)
Parameters
  • taskName (string) -- The name of the export task.
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • logStreamNamePrefix (string) -- Export only log streams that match the provided prefix. If you don't specify a value, no prefix filter is applied.
  • fromTime (integer) --

    [REQUIRED]

    The start time of the range for the request, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp earlier than this time are not exported.

  • to (integer) --

    [REQUIRED]

    The end time of the range for the request, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp later than this time are not exported.

  • destination (string) --

    [REQUIRED]

    The name of S3 bucket for the exported log data. The bucket must be in the same AWS region.

  • destinationPrefix (string) -- The prefix used as the start of the key for every object exported. If you don't specify a value, the default is exportedlogs .
Return type

dict

Returns

Response Syntax

{
    'taskId': 'string'
}

Response Structure

  • (dict) --

    • taskId (string) --

      The ID of the export task.

create_log_group(**kwargs)

Creates a log group with the specified name.

You can create up to 5000 log groups per account.

You must use the following guidelines when naming a log group:

  • Log group names must be unique within a region for an AWS account.
  • Log group names can be between 1 and 512 characters long.
  • Log group names consist of the following characters: a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), '/' (forward slash), and '.' (period).

See also: AWS API Documentation

Request Syntax

response = client.create_log_group(
    logGroupName='string',
    tags={
        'string': 'string'
    }
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • tags (dict) --

    The key-value pairs to use for the tags.

    • (string) --
      • (string) --
Returns

None

create_log_stream(**kwargs)

Creates a log stream for the specified log group.

There is no limit on the number of log streams that you can create for a log group.

You must use the following guidelines when naming a log stream:

  • Log stream names must be unique within the log group.
  • Log stream names can be between 1 and 512 characters long.
  • The ':' (colon) and '*' (asterisk) characters are not allowed.

See also: AWS API Documentation

Request Syntax

response = client.create_log_stream(
    logGroupName='string',
    logStreamName='string'
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • logStreamName (string) --

    [REQUIRED]

    The name of the log stream.

Returns

None

delete_destination(**kwargs)

Deletes the specified destination, and eventually disables all the subscription filters that publish to it. This operation does not delete the physical resource encapsulated by the destination.

See also: AWS API Documentation

Request Syntax

response = client.delete_destination(
    destinationName='string'
)
Parameters
destinationName (string) --

[REQUIRED]

The name of the destination.

Returns
None
delete_log_group(**kwargs)

Deletes the specified log group and permanently deletes all the archived log events associated with the log group.

See also: AWS API Documentation

Request Syntax

response = client.delete_log_group(
    logGroupName='string'
)
Parameters
logGroupName (string) --

[REQUIRED]

The name of the log group.

Returns
None
delete_log_stream(**kwargs)

Deletes the specified log stream and permanently deletes all the archived log events associated with the log stream.

See also: AWS API Documentation

Request Syntax

response = client.delete_log_stream(
    logGroupName='string',
    logStreamName='string'
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • logStreamName (string) --

    [REQUIRED]

    The name of the log stream.

Returns

None

delete_metric_filter(**kwargs)

Deletes the specified metric filter.

See also: AWS API Documentation

Request Syntax

response = client.delete_metric_filter(
    logGroupName='string',
    filterName='string'
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • filterName (string) --

    [REQUIRED]

    The name of the metric filter.

Returns

None

delete_retention_policy(**kwargs)

Deletes the specified retention policy.

Log events do not expire if they belong to log groups without a retention policy.

See also: AWS API Documentation

Request Syntax

response = client.delete_retention_policy(
    logGroupName='string'
)
Parameters
logGroupName (string) --

[REQUIRED]

The name of the log group.

Returns
None
delete_subscription_filter(**kwargs)

Deletes the specified subscription filter.

See also: AWS API Documentation

Request Syntax

response = client.delete_subscription_filter(
    logGroupName='string',
    filterName='string'
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • filterName (string) --

    [REQUIRED]

    The name of the subscription filter.

Returns

None

describe_destinations(**kwargs)

Lists all your destinations. The results are ASCII-sorted by destination name.

See also: AWS API Documentation

Request Syntax

response = client.describe_destinations(
    DestinationNamePrefix='string',
    nextToken='string',
    limit=123
)
Parameters
  • DestinationNamePrefix (string) -- The prefix to match. If you don't specify a value, no prefix filter is applied.
  • nextToken (string) -- The token for the next set of items to return. (You received this token from a previous call.)
  • limit (integer) -- The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
Return type

dict

Returns

Response Syntax

{
    'destinations': [
        {
            'destinationName': 'string',
            'targetArn': 'string',
            'roleArn': 'string',
            'accessPolicy': 'string',
            'arn': 'string',
            'creationTime': 123
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • destinations (list) --

      The destinations.

      • (dict) --

        Represents a cross-account destination that receives subscription log events.

        • destinationName (string) --

          The name of the destination.

        • targetArn (string) --

          The Amazon Resource Name (ARN) of the physical target where the log events will be delivered (for example, a Kinesis stream).

        • roleArn (string) --

          A role for impersonation, used when delivering log events to the target.

        • accessPolicy (string) --

          An IAM policy document that governs which AWS accounts can create subscription filters against this destination.

        • arn (string) --

          The ARN of this destination.

        • creationTime (integer) --

          The creation time of the destination.

    • nextToken (string) --

      The token for the next set of items to return. The token expires after 24 hours.

describe_export_tasks(**kwargs)

Lists the specified export tasks. You can list all your export tasks or filter the results based on task ID or task status.

See also: AWS API Documentation

Request Syntax

response = client.describe_export_tasks(
    taskId='string',
    statusCode='CANCELLED'|'COMPLETED'|'FAILED'|'PENDING'|'PENDING_CANCEL'|'RUNNING',
    nextToken='string',
    limit=123
)
Parameters
  • taskId (string) -- The ID of the export task. Specifying a task ID filters the results to zero or one export tasks.
  • statusCode (string) -- The status code of the export task. Specifying a status code filters the results to zero or more export tasks.
  • nextToken (string) -- The token for the next set of items to return. (You received this token from a previous call.)
  • limit (integer) -- The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
Return type

dict

Returns

Response Syntax

{
    'exportTasks': [
        {
            'taskId': 'string',
            'taskName': 'string',
            'logGroupName': 'string',
            'from': 123,
            'to': 123,
            'destination': 'string',
            'destinationPrefix': 'string',
            'status': {
                'code': 'CANCELLED'|'COMPLETED'|'FAILED'|'PENDING'|'PENDING_CANCEL'|'RUNNING',
                'message': 'string'
            },
            'executionInfo': {
                'creationTime': 123,
                'completionTime': 123
            }
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • exportTasks (list) --

      The export tasks.

      • (dict) --

        Represents an export task.

        • taskId (string) --

          The ID of the export task.

        • taskName (string) --

          The name of the export task.

        • logGroupName (string) --

          The name of the log group from which logs data was exported.

        • from (integer) --

          The start time, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp prior to this time are not exported.

        • to (integer) --

          The end time, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp later than this time are not exported.

        • destination (string) --

          The name of Amazon S3 bucket to which the log data was exported.

        • destinationPrefix (string) --

          The prefix that was used as the start of Amazon S3 key for every object exported.

        • status (dict) --

          The status of the export task.

          • code (string) --

            The status code of the export task.

          • message (string) --

            The status message related to the status code.

        • executionInfo (dict) --

          Execution info about the export task.

          • creationTime (integer) --

            The creation time of the export task.

          • completionTime (integer) --

            The completion time of the export task.

    • nextToken (string) --

      The token for the next set of items to return. The token expires after 24 hours.

describe_log_groups(**kwargs)

Lists the specified log groups. You can list all your log groups or filter the results by prefix. The results are ASCII-sorted by log group name.

See also: AWS API Documentation

Request Syntax

response = client.describe_log_groups(
    logGroupNamePrefix='string',
    nextToken='string',
    limit=123
)
Parameters
  • logGroupNamePrefix (string) -- The prefix to match.
  • nextToken (string) -- The token for the next set of items to return. (You received this token from a previous call.)
  • limit (integer) -- The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
Return type

dict

Returns

Response Syntax

{
    'logGroups': [
        {
            'logGroupName': 'string',
            'creationTime': 123,
            'retentionInDays': 123,
            'metricFilterCount': 123,
            'arn': 'string',
            'storedBytes': 123
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • logGroups (list) --

      The log groups.

      • (dict) --

        Represents a log group.

        • logGroupName (string) --

          The name of the log group.

        • creationTime (integer) --

          The creation time of the log group.

        • retentionInDays (integer) --

          The number of days to retain the log events in the specified log group. Possible values are: 1, 3, 5, 7, 14, 30, 60, 90, 120, 150, 180, 365, 400, 545, 731, 1827, and 3653.

        • metricFilterCount (integer) --

          The number of metric filters.

        • arn (string) --

          The Amazon Resource Name (ARN) of the log group.

        • storedBytes (integer) --

          The number of bytes stored.

    • nextToken (string) --

      The token for the next set of items to return. The token expires after 24 hours.

describe_log_streams(**kwargs)

Lists the log streams for the specified log group. You can list all the log streams or filter the results by prefix. You can also control how the results are ordered.

This operation has a limit of five transactions per second, after which transactions are throttled.

See also: AWS API Documentation

Request Syntax

response = client.describe_log_streams(
    logGroupName='string',
    logStreamNamePrefix='string',
    orderBy='LogStreamName'|'LastEventTime',
    descending=True|False,
    nextToken='string',
    limit=123
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • logStreamNamePrefix (string) --

    The prefix to match.

    You cannot specify this parameter if orderBy is LastEventTime .

  • orderBy (string) --

    If the value is LogStreamName , the results are ordered by log stream name. If the value is LastEventTime , the results are ordered by the event time. The default value is LogStreamName .

    If you order the results by event time, you cannot specify the logStreamNamePrefix parameter.

  • descending (boolean) -- If the value is true, results are returned in descending order. If the value is to false, results are returned in ascending order. The default value is false.
  • nextToken (string) -- The token for the next set of items to return. (You received this token from a previous call.)
  • limit (integer) -- The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
Return type

dict

Returns

Response Syntax

{
    'logStreams': [
        {
            'logStreamName': 'string',
            'creationTime': 123,
            'firstEventTimestamp': 123,
            'lastEventTimestamp': 123,
            'lastIngestionTime': 123,
            'uploadSequenceToken': 'string',
            'arn': 'string',
            'storedBytes': 123
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • logStreams (list) --

      The log streams.

      • (dict) --

        Represents a log stream, which is a sequence of log events from a single emitter of logs.

        • logStreamName (string) --

          The name of the log stream.

        • creationTime (integer) --

          The creation time of the stream.

        • firstEventTimestamp (integer) --

          The time of the first event, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC.

        • lastEventTimestamp (integer) --

          The time of the last event, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC.

        • lastIngestionTime (integer) --

          The ingestion time.

        • uploadSequenceToken (string) --

          The sequence token.

        • arn (string) --

          The Amazon Resource Name (ARN) of the log stream.

        • storedBytes (integer) --

          The number of bytes stored.

    • nextToken (string) --

      The token for the next set of items to return. The token expires after 24 hours.

describe_metric_filters(**kwargs)

Lists the specified metric filters. You can list all the metric filters or filter the results by log name, prefix, metric name, and metric namespace. The results are ASCII-sorted by filter name.

See also: AWS API Documentation

Request Syntax

response = client.describe_metric_filters(
    logGroupName='string',
    filterNamePrefix='string',
    nextToken='string',
    limit=123,
    metricName='string',
    metricNamespace='string'
)
Parameters
  • logGroupName (string) -- The name of the log group.
  • filterNamePrefix (string) -- The prefix to match.
  • nextToken (string) -- The token for the next set of items to return. (You received this token from a previous call.)
  • limit (integer) -- The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
  • metricName (string) -- The name of the CloudWatch metric.
  • metricNamespace (string) -- The namespace of the CloudWatch metric.
Return type

dict

Returns

Response Syntax

{
    'metricFilters': [
        {
            'filterName': 'string',
            'filterPattern': 'string',
            'metricTransformations': [
                {
                    'metricName': 'string',
                    'metricNamespace': 'string',
                    'metricValue': 'string',
                    'defaultValue': 123.0
                },
            ],
            'creationTime': 123,
            'logGroupName': 'string'
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • metricFilters (list) --

      The metric filters.

      • (dict) --

        Metric filters express how CloudWatch Logs would extract metric observations from ingested log events and transform them into metric data in a CloudWatch metric.

        • filterName (string) --

          The name of the metric filter.

        • filterPattern (string) --

          A symbolic description of how CloudWatch Logs should interpret the data in each log event. For example, a log event may contain timestamps, IP addresses, strings, and so on. You use the filter pattern to specify what to look for in the log event message.

        • metricTransformations (list) --

          The metric transformations.

          • (dict) --

            Indicates how to transform ingested log events into metric data in a CloudWatch metric.

            • metricName (string) --

              The name of the CloudWatch metric.

            • metricNamespace (string) --

              The namespace of the CloudWatch metric.

            • metricValue (string) --

              The value to publish to the CloudWatch metric when a filter pattern matches a log event.

            • defaultValue (float) --

              (Optional) The value to emit when a filter pattern does not match a log event. This value can be null.

        • creationTime (integer) --

          The creation time of the metric filter.

        • logGroupName (string) --

          The name of the log group.

    • nextToken (string) --

      The token for the next set of items to return. The token expires after 24 hours.

describe_subscription_filters(**kwargs)

Lists the subscription filters for the specified log group. You can list all the subscription filters or filter the results by prefix. The results are ASCII-sorted by filter name.

See also: AWS API Documentation

Request Syntax

response = client.describe_subscription_filters(
    logGroupName='string',
    filterNamePrefix='string',
    nextToken='string',
    limit=123
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • filterNamePrefix (string) -- The prefix to match. If you don't specify a value, no prefix filter is applied.
  • nextToken (string) -- The token for the next set of items to return. (You received this token from a previous call.)
  • limit (integer) -- The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
Return type

dict

Returns

Response Syntax

{
    'subscriptionFilters': [
        {
            'filterName': 'string',
            'logGroupName': 'string',
            'filterPattern': 'string',
            'destinationArn': 'string',
            'roleArn': 'string',
            'distribution': 'Random'|'ByLogStream',
            'creationTime': 123
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • subscriptionFilters (list) --

      The subscription filters.

      • (dict) --

        Represents a subscription filter.

        • filterName (string) --

          The name of the subscription filter.

        • logGroupName (string) --

          The name of the log group.

        • filterPattern (string) --

          A symbolic description of how CloudWatch Logs should interpret the data in each log event. For example, a log event may contain timestamps, IP addresses, strings, and so on. You use the filter pattern to specify what to look for in the log event message.

        • destinationArn (string) --

          The Amazon Resource Name (ARN) of the destination.

        • roleArn (string) --

        • distribution (string) --

          The method used to distribute log data to the destination, when the destination is an Amazon Kinesis stream.

        • creationTime (integer) --

          The creation time of the subscription filter.

    • nextToken (string) --

      The token for the next set of items to return. The token expires after 24 hours.

filter_log_events(**kwargs)

Lists log events from the specified log group. You can list all the log events or filter the results using a filter pattern, a time range, and the name of the log stream.

By default, this operation returns as many log events as can fit in 1MB (up to 10,000 log events), or all the events found within the time range that you specify. If the results include a token, then there are more log events available, and you can get additional results by specifying the token in a subsequent call.

See also: AWS API Documentation

Request Syntax

response = client.filter_log_events(
    logGroupName='string',
    logStreamNames=[
        'string',
    ],
    startTime=123,
    endTime=123,
    filterPattern='string',
    nextToken='string',
    limit=123,
    interleaved=True|False
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • logStreamNames (list) --

    Optional list of log stream names.

    • (string) --
  • startTime (integer) -- The start of the time range, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp prior to this time are not returned.
  • endTime (integer) -- The end of the time range, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp later than this time are not returned.
  • filterPattern (string) -- The filter pattern to use. If not provided, all the events are matched.
  • nextToken (string) -- The token for the next set of events to return. (You received this token from a previous call.)
  • limit (integer) -- The maximum number of events to return. The default is 10,000 events.
  • interleaved (boolean) -- If the value is true, the operation makes a best effort to provide responses that contain events from multiple log streams within the log group interleaved in a single response. If the value is false all the matched log events in the first log stream are searched first, then those in the next log stream, and so on. The default is false.
Return type

dict

Returns

Response Syntax

{
    'events': [
        {
            'logStreamName': 'string',
            'timestamp': 123,
            'message': 'string',
            'ingestionTime': 123,
            'eventId': 'string'
        },
    ],
    'searchedLogStreams': [
        {
            'logStreamName': 'string',
            'searchedCompletely': True|False
        },
    ],
    'nextToken': 'string'
}

Response Structure

  • (dict) --

    • events (list) --

      The matched events.

      • (dict) --

        Represents a matched event.

        • logStreamName (string) --

          The name of the log stream this event belongs to.

        • timestamp (integer) --

          The time the event occurred, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC.

        • message (string) --

          The data contained in the log event.

        • ingestionTime (integer) --

          The time the event was ingested.

        • eventId (string) --

          The ID of the event.

    • searchedLogStreams (list) --

      Indicates which log streams have been searched and whether each has been searched completely.

      • (dict) --

        Represents the search status of a log stream.

        • logStreamName (string) --

          The name of the log stream.

        • searchedCompletely (boolean) --

          Indicates whether all the events in this log stream were searched.

    • nextToken (string) --

      The token to use when requesting the next set of items. The token expires after 24 hours.

generate_presigned_url(ClientMethod, Params=None, ExpiresIn=3600, HttpMethod=None)

Generate a presigned url given a client, its method, and arguments

Parameters
  • ClientMethod (string) -- The client method to presign for
  • Params (dict) -- The parameters normally passed to ClientMethod.
  • ExpiresIn (int) -- The number of seconds the presigned url is valid for. By default it expires in an hour (3600 seconds)
  • HttpMethod (string) -- The http method to use on the generated url. By default, the http method is whatever is used in the method's model.
Returns

The presigned url

get_log_events(**kwargs)

Lists log events from the specified log stream. You can list all the log events or filter using a time range.

By default, this operation returns as many log events as can fit in a response size of 1MB (up to 10,000 log events). If the results include tokens, there are more log events available. You can get additional log events by specifying one of the tokens in a subsequent call.

See also: AWS API Documentation

Request Syntax

response = client.get_log_events(
    logGroupName='string',
    logStreamName='string',
    startTime=123,
    endTime=123,
    nextToken='string',
    limit=123,
    startFromHead=True|False
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • logStreamName (string) --

    [REQUIRED]

    The name of the log stream.

  • startTime (integer) -- The start of the time range, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp earlier than this time are not included.
  • endTime (integer) -- The end of the time range, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp later than this time are not included.
  • nextToken (string) -- The token for the next set of items to return. (You received this token from a previous call.)
  • limit (integer) -- The maximum number of log events returned. If you don't specify a value, the maximum is as many log events as can fit in a response size of 1MB, up to 10,000 log events.
  • startFromHead (boolean) -- If the value is true, the earliest log events are returned first. If the value is false, the latest log events are returned first. The default value is false.
Return type

dict

Returns

Response Syntax

{
    'events': [
        {
            'timestamp': 123,
            'message': 'string',
            'ingestionTime': 123
        },
    ],
    'nextForwardToken': 'string',
    'nextBackwardToken': 'string'
}

Response Structure

  • (dict) --

    • events (list) --

      The events.

      • (dict) --

        Represents a log event.

        • timestamp (integer) --

          The time the event occurred, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC.

        • message (string) --

          The data contained in the log event.

        • ingestionTime (integer) --

          The time the event was ingested.

    • nextForwardToken (string) --

      The token for the next set of items in the forward direction. The token expires after 24 hours.

    • nextBackwardToken (string) --

      The token for the next set of items in the backward direction. The token expires after 24 hours.

get_paginator(operation_name)

Create a paginator for an operation.

Parameters
operation_name (string) -- The operation name. This is the same name as the method name on the client. For example, if the method name is create_foo, and you'd normally invoke the operation as client.create_foo(**kwargs), if the create_foo operation can be paginated, you can use the call client.get_paginator("create_foo").
Raises OperationNotPageableError
Raised if the operation is not pageable. You can use the client.can_paginate method to check if an operation is pageable.
Return type
L{botocore.paginate.Paginator}
Returns
A paginator object.
get_waiter(waiter_name)
list_tags_log_group(**kwargs)

Lists the tags for the specified log group.

To add tags, use TagLogGroup . To remove tags, use UntagLogGroup .

See also: AWS API Documentation

Request Syntax

response = client.list_tags_log_group(
    logGroupName='string'
)
Parameters
logGroupName (string) --

[REQUIRED]

The name of the log group.

Return type
dict
Returns
Response Syntax
{
    'tags': {
        'string': 'string'
    }
}

Response Structure

  • (dict) --
    • tags (dict) --

      The tags.

      • (string) --
        • (string) --
put_destination(**kwargs)

Creates or updates a destination. A destination encapsulates a physical resource (such as a Kinesis stream) and enables you to subscribe to a real-time stream of log events of a different account, ingested using PutLogEvents . Currently, the only supported physical resource is a Amazon Kinesis stream belonging to the same account as the destination.

A destination controls what is written to its Amazon Kinesis stream through an access policy. By default, PutDestination does not set any access policy with the destination, which means a cross-account user cannot call PutSubscriptionFilter against this destination. To enable this, the destination owner must call PutDestinationPolicy after PutDestination .

See also: AWS API Documentation

Request Syntax

response = client.put_destination(
    destinationName='string',
    targetArn='string',
    roleArn='string'
)
Parameters
  • destinationName (string) --

    [REQUIRED]

    A name for the destination.

  • targetArn (string) --

    [REQUIRED]

    The ARN of an Amazon Kinesis stream to deliver matching log events to.

  • roleArn (string) --

    [REQUIRED]

    The ARN of an IAM role that grants CloudWatch Logs permissions to call Amazon Kinesis PutRecord on the destination stream.

Return type

dict

Returns

Response Syntax

{
    'destination': {
        'destinationName': 'string',
        'targetArn': 'string',
        'roleArn': 'string',
        'accessPolicy': 'string',
        'arn': 'string',
        'creationTime': 123
    }
}

Response Structure

  • (dict) --

    • destination (dict) --

      The destination.

      • destinationName (string) --

        The name of the destination.

      • targetArn (string) --

        The Amazon Resource Name (ARN) of the physical target where the log events will be delivered (for example, a Kinesis stream).

      • roleArn (string) --

        A role for impersonation, used when delivering log events to the target.

      • accessPolicy (string) --

        An IAM policy document that governs which AWS accounts can create subscription filters against this destination.

      • arn (string) --

        The ARN of this destination.

      • creationTime (integer) --

        The creation time of the destination.

put_destination_policy(**kwargs)

Creates or updates an access policy associated with an existing destination. An access policy is an IAM policy document that is used to authorize claims to register a subscription filter against a given destination.

See also: AWS API Documentation

Request Syntax

response = client.put_destination_policy(
    destinationName='string',
    accessPolicy='string'
)
Parameters
  • destinationName (string) --

    [REQUIRED]

    A name for an existing destination.

  • accessPolicy (string) --

    [REQUIRED]

    An IAM policy document that authorizes cross-account users to deliver their log events to the associated destination.

Returns

None

put_log_events(**kwargs)

Uploads a batch of log events to the specified log stream.

You must include the sequence token obtained from the response of the previous call. An upload in a newly created log stream does not require a sequence token. You can also get the sequence token using DescribeLogStreams .

The batch of events must satisfy the following constraints:

  • The maximum batch size is 1,048,576 bytes, and this size is calculated as the sum of all event messages in UTF-8, plus 26 bytes for each log event.
  • None of the log events in the batch can be more than 2 hours in the future.
  • None of the log events in the batch can be older than 14 days or the retention period of the log group.
  • The log events in the batch must be in chronological ordered by their timestamp (the time the event occurred, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC).
  • The maximum number of log events in a batch is 10,000.
  • A batch of log events in a single request cannot span more than 24 hours. Otherwise, the operation fails.

See also: AWS API Documentation

Request Syntax

response = client.put_log_events(
    logGroupName='string',
    logStreamName='string',
    logEvents=[
        {
            'timestamp': 123,
            'message': 'string'
        },
    ],
    sequenceToken='string'
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • logStreamName (string) --

    [REQUIRED]

    The name of the log stream.

  • logEvents (list) --

    [REQUIRED]

    The log events.

    • (dict) --

      Represents a log event, which is a record of activity that was recorded by the application or resource being monitored.

      • timestamp (integer) -- [REQUIRED]

        The time the event occurred, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC.

      • message (string) -- [REQUIRED]

        The raw event message.

  • sequenceToken (string) -- The sequence token.
Return type

dict

Returns

Response Syntax

{
    'nextSequenceToken': 'string',
    'rejectedLogEventsInfo': {
        'tooNewLogEventStartIndex': 123,
        'tooOldLogEventEndIndex': 123,
        'expiredLogEventEndIndex': 123
    }
}

Response Structure

  • (dict) --

    • nextSequenceToken (string) --

      The next sequence token.

    • rejectedLogEventsInfo (dict) --

      The rejected events.

      • tooNewLogEventStartIndex (integer) --

        The log events that are too new.

      • tooOldLogEventEndIndex (integer) --

        The log events that are too old.

      • expiredLogEventEndIndex (integer) --

        The expired log events.

put_metric_filter(**kwargs)

Creates or updates a metric filter and associates it with the specified log group. Metric filters allow you to configure rules to extract metric data from log events ingested through PutLogEvents .

The maximum number of metric filters that can be associated with a log group is 100.

See also: AWS API Documentation

Request Syntax

response = client.put_metric_filter(
    logGroupName='string',
    filterName='string',
    filterPattern='string',
    metricTransformations=[
        {
            'metricName': 'string',
            'metricNamespace': 'string',
            'metricValue': 'string',
            'defaultValue': 123.0
        },
    ]
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • filterName (string) --

    [REQUIRED]

    A name for the metric filter.

  • filterPattern (string) --

    [REQUIRED]

    A filter pattern for extracting metric data out of ingested log events.

  • metricTransformations (list) --

    [REQUIRED]

    A collection of information needed to define how metric data gets emitted.

    • (dict) --

      Indicates how to transform ingested log events into metric data in a CloudWatch metric.

      • metricName (string) -- [REQUIRED]

        The name of the CloudWatch metric.

      • metricNamespace (string) -- [REQUIRED]

        The namespace of the CloudWatch metric.

      • metricValue (string) -- [REQUIRED]

        The value to publish to the CloudWatch metric when a filter pattern matches a log event.

      • defaultValue (float) --

        (Optional) The value to emit when a filter pattern does not match a log event. This value can be null.

Returns

None

put_retention_policy(**kwargs)

Sets the retention of the specified log group. A retention policy allows you to configure the number of days you want to retain log events in the specified log group.

See also: AWS API Documentation

Request Syntax

response = client.put_retention_policy(
    logGroupName='string',
    retentionInDays=123
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • retentionInDays (integer) --

    [REQUIRED]

    The number of days to retain the log events in the specified log group. Possible values are: 1, 3, 5, 7, 14, 30, 60, 90, 120, 150, 180, 365, 400, 545, 731, 1827, and 3653.

Returns

None

put_subscription_filter(**kwargs)

Creates or updates a subscription filter and associates it with the specified log group. Subscription filters allow you to subscribe to a real-time stream of log events ingested through PutLogEvents and have them delivered to a specific destination. Currently, the supported destinations are:

  • An Amazon Kinesis stream belonging to the same account as the subscription filter, for same-account delivery.
  • A logical destination that belongs to a different account, for cross-account delivery.
  • An Amazon Kinesis Firehose stream that belongs to the same account as the subscription filter, for same-account delivery.
  • An AWS Lambda function that belongs to the same account as the subscription filter, for same-account delivery.

There can only be one subscription filter associated with a log group.

See also: AWS API Documentation

Request Syntax

response = client.put_subscription_filter(
    logGroupName='string',
    filterName='string',
    filterPattern='string',
    destinationArn='string',
    roleArn='string',
    distribution='Random'|'ByLogStream'
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • filterName (string) --

    [REQUIRED]

    A name for the subscription filter.

  • filterPattern (string) --

    [REQUIRED]

    A filter pattern for subscribing to a filtered stream of log events.

  • destinationArn (string) --

    [REQUIRED]

    The ARN of the destination to deliver matching log events to. Currently, the supported destinations are:

    • An Amazon Kinesis stream belonging to the same account as the subscription filter, for same-account delivery.
    • A logical destination (specified using an ARN) belonging to a different account, for cross-account delivery.
    • An Amazon Kinesis Firehose stream belonging to the same account as the subscription filter, for same-account delivery.
    • An AWS Lambda function belonging to the same account as the subscription filter, for same-account delivery.
  • roleArn (string) -- The ARN of an IAM role that grants CloudWatch Logs permissions to deliver ingested log events to the destination stream. You don't need to provide the ARN when you are working with a logical destination for cross-account delivery.
  • distribution (string) -- The method used to distribute log data to the destination, when the destination is an Amazon Kinesis stream. By default, log data is grouped by log stream. For a more even distribution, you can group log data randomly.
Returns

None

tag_log_group(**kwargs)

Adds or updates the specified tags for the specified log group.

To list the tags for a log group, use ListTagsLogGroup . To remove tags, use UntagLogGroup .

For more information about tags, see Tag Log Groups in Amazon CloudWatch Logs in the Amazon CloudWatch Logs User Guide .

See also: AWS API Documentation

Request Syntax

response = client.tag_log_group(
    logGroupName='string',
    tags={
        'string': 'string'
    }
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • tags (dict) --

    [REQUIRED]

    The key-value pairs to use for the tags.

    • (string) --
      • (string) --
Returns

None

test_metric_filter(**kwargs)

Tests the filter pattern of a metric filter against a sample of log event messages. You can use this operation to validate the correctness of a metric filter pattern.

See also: AWS API Documentation

Request Syntax

response = client.test_metric_filter(
    filterPattern='string',
    logEventMessages=[
        'string',
    ]
)
Parameters
  • filterPattern (string) --

    [REQUIRED]

    A symbolic description of how CloudWatch Logs should interpret the data in each log event. For example, a log event may contain timestamps, IP addresses, strings, and so on. You use the filter pattern to specify what to look for in the log event message.

  • logEventMessages (list) --

    [REQUIRED]

    The log event messages to test.

    • (string) --
Return type

dict

Returns

Response Syntax

{
    'matches': [
        {
            'eventNumber': 123,
            'eventMessage': 'string',
            'extractedValues': {
                'string': 'string'
            }
        },
    ]
}

Response Structure

  • (dict) --

    • matches (list) --

      The matched events.

      • (dict) --

        Represents a matched event.

        • eventNumber (integer) --

          The event number.

        • eventMessage (string) --

          The raw event data.

        • extractedValues (dict) --

          The values extracted from the event data by the filter.

          • (string) --
            • (string) --

untag_log_group(**kwargs)

Removes the specified tags from the specified log group.

To list the tags for a log group, use ListTagsLogGroup . To add tags, use UntagLogGroup .

See also: AWS API Documentation

Request Syntax

response = client.untag_log_group(
    logGroupName='string',
    tags=[
        'string',
    ]
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • tags (list) --

    [REQUIRED]

    The tag keys. The corresponding tags are removed from the log group.

    • (string) --
Returns

None

Paginators

The available paginators are:

class CloudWatchLogs.Paginator.DescribeDestinations
paginator = client.get_paginator('describe_destinations')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CloudWatchLogs.Client.describe_destinations().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    DestinationNamePrefix='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • DestinationNamePrefix (string) -- The prefix to match. If you don't specify a value, no prefix filter is applied.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'destinations': [
        {
            'destinationName': 'string',
            'targetArn': 'string',
            'roleArn': 'string',
            'accessPolicy': 'string',
            'arn': 'string',
            'creationTime': 123
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • destinations (list) --

      The destinations.

      • (dict) --

        Represents a cross-account destination that receives subscription log events.

        • destinationName (string) --

          The name of the destination.

        • targetArn (string) --

          The Amazon Resource Name (ARN) of the physical target where the log events will be delivered (for example, a Kinesis stream).

        • roleArn (string) --

          A role for impersonation, used when delivering log events to the target.

        • accessPolicy (string) --

          An IAM policy document that governs which AWS accounts can create subscription filters against this destination.

        • arn (string) --

          The ARN of this destination.

        • creationTime (integer) --

          The creation time of the destination.

    • NextToken (string) --

      A token to resume pagination.

class CloudWatchLogs.Paginator.DescribeLogGroups
paginator = client.get_paginator('describe_log_groups')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CloudWatchLogs.Client.describe_log_groups().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    logGroupNamePrefix='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • logGroupNamePrefix (string) -- The prefix to match.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'logGroups': [
        {
            'logGroupName': 'string',
            'creationTime': 123,
            'retentionInDays': 123,
            'metricFilterCount': 123,
            'arn': 'string',
            'storedBytes': 123
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • logGroups (list) --

      The log groups.

      • (dict) --

        Represents a log group.

        • logGroupName (string) --

          The name of the log group.

        • creationTime (integer) --

          The creation time of the log group.

        • retentionInDays (integer) --

          The number of days to retain the log events in the specified log group. Possible values are: 1, 3, 5, 7, 14, 30, 60, 90, 120, 150, 180, 365, 400, 545, 731, 1827, and 3653.

        • metricFilterCount (integer) --

          The number of metric filters.

        • arn (string) --

          The Amazon Resource Name (ARN) of the log group.

        • storedBytes (integer) --

          The number of bytes stored.

    • NextToken (string) --

      A token to resume pagination.

class CloudWatchLogs.Paginator.DescribeLogStreams
paginator = client.get_paginator('describe_log_streams')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CloudWatchLogs.Client.describe_log_streams().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    logGroupName='string',
    logStreamNamePrefix='string',
    orderBy='LogStreamName'|'LastEventTime',
    descending=True|False,
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • logStreamNamePrefix (string) --

    The prefix to match.

    You cannot specify this parameter if orderBy is LastEventTime .

  • orderBy (string) --

    If the value is LogStreamName , the results are ordered by log stream name. If the value is LastEventTime , the results are ordered by the event time. The default value is LogStreamName .

    If you order the results by event time, you cannot specify the logStreamNamePrefix parameter.

  • descending (boolean) -- If the value is true, results are returned in descending order. If the value is to false, results are returned in ascending order. The default value is false.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'logStreams': [
        {
            'logStreamName': 'string',
            'creationTime': 123,
            'firstEventTimestamp': 123,
            'lastEventTimestamp': 123,
            'lastIngestionTime': 123,
            'uploadSequenceToken': 'string',
            'arn': 'string',
            'storedBytes': 123
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • logStreams (list) --

      The log streams.

      • (dict) --

        Represents a log stream, which is a sequence of log events from a single emitter of logs.

        • logStreamName (string) --

          The name of the log stream.

        • creationTime (integer) --

          The creation time of the stream.

        • firstEventTimestamp (integer) --

          The time of the first event, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC.

        • lastEventTimestamp (integer) --

          The time of the last event, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC.

        • lastIngestionTime (integer) --

          The ingestion time.

        • uploadSequenceToken (string) --

          The sequence token.

        • arn (string) --

          The Amazon Resource Name (ARN) of the log stream.

        • storedBytes (integer) --

          The number of bytes stored.

    • NextToken (string) --

      A token to resume pagination.

class CloudWatchLogs.Paginator.DescribeMetricFilters
paginator = client.get_paginator('describe_metric_filters')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CloudWatchLogs.Client.describe_metric_filters().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    logGroupName='string',
    filterNamePrefix='string',
    metricName='string',
    metricNamespace='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • logGroupName (string) -- The name of the log group.
  • filterNamePrefix (string) -- The prefix to match.
  • metricName (string) -- The name of the CloudWatch metric.
  • metricNamespace (string) -- The namespace of the CloudWatch metric.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'metricFilters': [
        {
            'filterName': 'string',
            'filterPattern': 'string',
            'metricTransformations': [
                {
                    'metricName': 'string',
                    'metricNamespace': 'string',
                    'metricValue': 'string',
                    'defaultValue': 123.0
                },
            ],
            'creationTime': 123,
            'logGroupName': 'string'
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • metricFilters (list) --

      The metric filters.

      • (dict) --

        Metric filters express how CloudWatch Logs would extract metric observations from ingested log events and transform them into metric data in a CloudWatch metric.

        • filterName (string) --

          The name of the metric filter.

        • filterPattern (string) --

          A symbolic description of how CloudWatch Logs should interpret the data in each log event. For example, a log event may contain timestamps, IP addresses, strings, and so on. You use the filter pattern to specify what to look for in the log event message.

        • metricTransformations (list) --

          The metric transformations.

          • (dict) --

            Indicates how to transform ingested log events into metric data in a CloudWatch metric.

            • metricName (string) --

              The name of the CloudWatch metric.

            • metricNamespace (string) --

              The namespace of the CloudWatch metric.

            • metricValue (string) --

              The value to publish to the CloudWatch metric when a filter pattern matches a log event.

            • defaultValue (float) --

              (Optional) The value to emit when a filter pattern does not match a log event. This value can be null.

        • creationTime (integer) --

          The creation time of the metric filter.

        • logGroupName (string) --

          The name of the log group.

    • NextToken (string) --

      A token to resume pagination.

class CloudWatchLogs.Paginator.DescribeSubscriptionFilters
paginator = client.get_paginator('describe_subscription_filters')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CloudWatchLogs.Client.describe_subscription_filters().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    logGroupName='string',
    filterNamePrefix='string',
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • filterNamePrefix (string) -- The prefix to match. If you don't specify a value, no prefix filter is applied.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'subscriptionFilters': [
        {
            'filterName': 'string',
            'logGroupName': 'string',
            'filterPattern': 'string',
            'destinationArn': 'string',
            'roleArn': 'string',
            'distribution': 'Random'|'ByLogStream',
            'creationTime': 123
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • subscriptionFilters (list) --

      The subscription filters.

      • (dict) --

        Represents a subscription filter.

        • filterName (string) --

          The name of the subscription filter.

        • logGroupName (string) --

          The name of the log group.

        • filterPattern (string) --

          A symbolic description of how CloudWatch Logs should interpret the data in each log event. For example, a log event may contain timestamps, IP addresses, strings, and so on. You use the filter pattern to specify what to look for in the log event message.

        • destinationArn (string) --

          The Amazon Resource Name (ARN) of the destination.

        • roleArn (string) --

        • distribution (string) --

          The method used to distribute log data to the destination, when the destination is an Amazon Kinesis stream.

        • creationTime (integer) --

          The creation time of the subscription filter.

    • NextToken (string) --

      A token to resume pagination.

class CloudWatchLogs.Paginator.FilterLogEvents
paginator = client.get_paginator('filter_log_events')
paginate(**kwargs)

Creates an iterator that will paginate through responses from CloudWatchLogs.Client.filter_log_events().

See also: AWS API Documentation

Request Syntax

response_iterator = paginator.paginate(
    logGroupName='string',
    logStreamNames=[
        'string',
    ],
    startTime=123,
    endTime=123,
    filterPattern='string',
    interleaved=True|False,
    PaginationConfig={
        'MaxItems': 123,
        'PageSize': 123,
        'StartingToken': 'string'
    }
)
Parameters
  • logGroupName (string) --

    [REQUIRED]

    The name of the log group.

  • logStreamNames (list) --

    Optional list of log stream names.

    • (string) --
  • startTime (integer) -- The start of the time range, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp prior to this time are not returned.
  • endTime (integer) -- The end of the time range, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC. Events with a timestamp later than this time are not returned.
  • filterPattern (string) -- The filter pattern to use. If not provided, all the events are matched.
  • interleaved (boolean) -- If the value is true, the operation makes a best effort to provide responses that contain events from multiple log streams within the log group interleaved in a single response. If the value is false all the matched log events in the first log stream are searched first, then those in the next log stream, and so on. The default is false.
  • PaginationConfig (dict) --

    A dictionary that provides parameters to control pagination.

    • MaxItems (integer) --

      The total number of items to return. If the total number of items available is more than the value specified in max-items then a NextToken will be provided in the output that you can use to resume pagination.

    • PageSize (integer) --

      The size of each page.

    • StartingToken (string) --

      A token to specify where to start paginating. This is the NextToken from a previous response.

Return type

dict

Returns

Response Syntax

{
    'events': [
        {
            'logStreamName': 'string',
            'timestamp': 123,
            'message': 'string',
            'ingestionTime': 123,
            'eventId': 'string'
        },
    ],
    'searchedLogStreams': [
        {
            'logStreamName': 'string',
            'searchedCompletely': True|False
        },
    ],
    'NextToken': 'string'
}

Response Structure

  • (dict) --

    • events (list) --

      The matched events.

      • (dict) --

        Represents a matched event.

        • logStreamName (string) --

          The name of the log stream this event belongs to.

        • timestamp (integer) --

          The time the event occurred, expressed as the number of milliseconds since Jan 1, 1970 00:00:00 UTC.

        • message (string) --

          The data contained in the log event.

        • ingestionTime (integer) --

          The time the event was ingested.

        • eventId (string) --

          The ID of the event.

    • searchedLogStreams (list) --

      Indicates which log streams have been searched and whether each has been searched completely.

      • (dict) --

        Represents the search status of a log stream.

        • logStreamName (string) --

          The name of the log stream.

        • searchedCompletely (boolean) --

          Indicates whether all the events in this log stream were searched.

    • NextToken (string) --

      A token to resume pagination.